Fiber Patch Cable

Ürün: Fiber Patch Cable

Verada Tech kalite ve güvencesiyle veri merkezleri ve kurumsal ağ altyapıları için tasarlanmış yüksek performanslı, %100 uyumlu profesyonel donanım çözümü. Projenize özel fiyatlandırma ve teknik destek için bizimle iletişime geçin.

Paylaş

Açıklama

Geleceğe Hazır Yapısal Kablolama ve Altyapı

Yüksek hızlı ağ mimarilerinde fiziksel katmanın kalitesi, tüm sistemin performansını belirler. Fiber Patch Cable, uluslararası yapısal kablolama ve izolasyon standartlarını en üst düzeyde karşılayacak şekilde üretilmiştir. Kurumsal veri merkezleri, kampüs ağları ve zorlu endüstriyel koşullarda sıfır veri kaybı, yüksek bant genişliği ve elektromanyetik izolasyon sağlayarak uzun ömürlü bir omurga oluşturur.

OM5 wideband multimode bend insensitive fiber optimized for multi-wavelengths transmission systems operating in the range of 850-953nm, enabling optimal support of emerging Shortwave Wavelength Division Multiplexing (SWDM) applications that reduce parallel fiber count by at least a factor of four to allow continued use of just two fibers (rather than eight) for transmitting 40 Gb/s and 100 Gb/s and reduced fiber counts for higher speeds.

Specifications

Connector A
LC UPC Duplex
Connector B
LC UPC Duplex

Fiber Count
2 Fibers
Fiber Grade
Bend Insensitive

Fiber Mode
OM5 50/125μm
Wavelength
850/1300nm

Polarity
A (Tx) to B (Rx)
Cable Type
Tight-Buffered

Cable Outside Diameter (OD)
2.0mm
Cable Jacket
Riser (OFNR)

Min. Bend Radius (Optical Fiber)
7.5mm
Min. Bend Radius (Fiber Cable)
20/10D (Dynamic/Static)

Connector Durability
1000 times
Tensile Strength (Long/Short Term)
90/150N

Insertion Loss
≤0.3dB
Return Loss
≥30dB

Attenuation at 850 nm
3.0dB/km
Attenuation at 1300 nm
1.0dB/km

Operating Temperature
-20 to 70°C (-4 to 158℉)
Storage Temperature
-40 to 80°C (-40 to 176℉)