Access Networks – Yenilikçi Datacenter ve Akıllı Ev Sistemleri

Customized Active Dual Fiber DWDM Mux

admin — Fri, 20 Sep 2024 09:37:52 +0000

Kurumsal IT ve Donanım Çözümleri

Customized Active Dual Fiber DWDM Mux, Verada Tech’in üstün kalite kontrol süreçlerinden geçmiş, kurumsal IT projelerinizde tam performans ve uzun ömürlü kullanım sunmak üzere tasarlanmış profesyonel bir altyapı çözümüdür. Sistemlerinize kolayca entegre edilerek operasyonel verimliliğinizi artırır.

The 8CH DWDM Mux Demux is a high-density, low loss, active DWDM device. This DWDM Mux Demux has a Monitor port that taps off 5% of the transmitted and received line signal which provides the ability to monitor the channel power levels via a connected Optical Channel Monitoring (OCM) device or an optical spectrum analyzer.

Specifications

Wavelength

C21-C60

Channel Spacing

100GHz (0.8nm)

Center Wavelength Accuracy

±0.05nm

Directivity

≥50dB

Insertion Loss

≤3.2dB

Return Loss

≥45dB

Insertion Loss Uniformity

3dB

Passband Ripple

≤0.5dB

Polarization Mode Dispersion

≤0.5ps

Polarization Dependent Loss

≤0.15dB

Channel Isolation

Adjacent≥28dB
Non-adjacent≥45dB

Power Consumption

≤1W

Temperature

Operation: -5 to 55°C (23 to 131°F)
Storage: -25 to 70°C (-13 to 158°F)

Housing

Pluggable Module (Occupies 1-slot in MS8100 managed chassis)

Note: Insertion Loss is specified with connectors and adapters.

FMU-DCM40

admin — Fri, 20 Sep 2024 09:37:46 +0000

Kurumsal IT ve Donanım Çözümleri

FMU-DCM40, Verada Tech’in üstün kalite kontrol süreçlerinden geçmiş, kurumsal IT projelerinizde tam performans ve uzun ömürlü kullanım sunmak üzere tasarlanmış profesyonel bir altyapı çözümüdür. Sistemlerinize kolayca entegre edilerek operasyonel verimliliğinizi artırır.

Dispersion Compensation Module (DCM) is designed to fix the form of optical signals that are deformed by chromatic dispersion. The module offers a high level of compensation while maintaining a low flat insertion loss as well as a low latency，which can be used with MS8100 series cards.

Specifications

Compensation Length

40km

Wavelength Range

1525nm~1565nm

Dispersion @1545nm (ps/nm)

-680±3%

Connector

LC/UPC

Insertion Loss

≤4.2dB

For Use With

MS8100 Series

Polarization Mode Dispersion

≤0.8ps

Polarization Dependence Loss

≤0.1dB

Operating Temperature

5 to 55°C (41 to 131℉)

Storage Temperature

-40 to 85°C (-40 to 185℉)

FMU-DCM80

admin — Fri, 20 Sep 2024 09:37:26 +0000

Kurumsal IT ve Donanım Çözümleri

FMU-DCM80, Verada Tech’in üstün kalite kontrol süreçlerinden geçmiş, kurumsal IT projelerinizde tam performans ve uzun ömürlü kullanım sunmak üzere tasarlanmış profesyonel bir altyapı çözümüdür. Sistemlerinize kolayca entegre edilerek operasyonel verimliliğinizi artırır.

Specifications

Compensation Length

80km

Wavelength Range

1525nm~1565nm

Dispersion @1545nm (ps/nm)

-1360±3%

Connector

LC/UPC

Insertion Loss

≤5.8dB

For Use With

MS8100 Series

Polarization Mode Dispersion

≤1.2ps

Polarization Dependence Loss

≤0.1dB

Operating Temperature

-5 to 55°C (23 to 131℉)

Storage Temperature

-40 to 85°C (-40 to 185℉)

MS8100 OPA1525

admin — Fri, 20 Sep 2024 09:37:18 +0000

Kurumsal IT ve Donanım Çözümleri

MS8100 OPA1525, Verada Tech’in üstün kalite kontrol süreçlerinden geçmiş, kurumsal IT projelerinizde tam performans ve uzun ömürlü kullanım sunmak üzere tasarlanmış profesyonel bir altyapı çözümüdür. Sistemlerinize kolayca entegre edilerek operasyonel verimliliğinizi artırır.

The MS8100 series EDFA is designed to cost-effectively extend the link power budget for building long-distance DWDM solutions.It amplifies a range of optical solutions starting from a single wavelength to full ITU C-Band 40 DWDM wavelength.

Specifications

Amplifier Type

Pre-Amplifier

Operation Wavelength

C21-C60

Optical Gain

19-25dB

Gain Flatness

1.5dB (Typical)

Input Power

-35dBm~-10dBm

Saturated Output Power

≤15dBm

Noise Figure

5.5dB (Typical)

Optical Connector

LC/UPC

Operation Mode

AGC/APC/ACC

Management

CLI, Telnet, SNMP, FCP MS (WEB)

Operation Temperature

–5 to 55°C (23 to 131°F)

Storage Temperature

-25 to 70°C (-13 to 158°F)

Power Consumption

≤15W

Housing

Pluggable Module (Occupies 1 slot in MS8100 managed chassis)

MS8100 TN4

admin — Fri, 20 Sep 2024 09:37:12 +0000

Kurumsal IT ve Donanım Çözümleri

MS8100 TN4, Verada Tech’in üstün kalite kontrol süreçlerinden geçmiş, kurumsal IT projelerinizde tam performans ve uzun ömürlü kullanım sunmak üzere tasarlanmış profesyonel bir altyapı çözümüdür. Sistemlerinize kolayca entegre edilerek operasyonel verimliliğinizi artırır.

TN4 is a 4-way OTU2 hybrid line board, supporting access to 4x 10GE services through the backplane (mapped to 32 virtual interfaces based on interfaces and VLANs) and 4 channels of STM-16 services, which aggregates to 4 channels of OTU2 services and uplinks to the OTN network. It has multiple adjustable parameters including ODUK/VC/PKT/FEC overhead.

Specifications

Interface

4x SFP/SFP+

Protection Mode

ODU0/ODU1/ODUflex SNCP 1+1 Protection for Intra-card/Inter-board;
1+1 MSP and VC12/VC3/VC4 SNCP Protection for SDH Services

Alarm Masking

Based on Alarm Type or Port

Performance Monitoring and Alarm

Support PM, SM, TCMi Layer Alarm, Performance Monitoring and Processing

Clock

Support Receive Clock Recovery Signals and Transmission Frequency;
Support 2-way Clock Source, Select Valid Clock as System Clock

Unified Cross Mode Cross Function

Intra-card/Inter-board ODU0/1/2/flex Cross Connection;
Two-way Cross Connection and SNCP

ECC

Support up to 16 GCC, GCC0/1/2 are Optional

Integrated Network Management Southbound Interface

Support GCC2 and TCM2 to Carry Management Information

Temperature Detection

Supported

Error Correction

Support GFEC and no FEC

Uplink Rate

OTU2

Loopback

Supported

Reset

Software Reset

Upgrade

Support Upgrading the Software

Optical Module Management

Support DDM

Hot Swapping

Supported