POEX1 is a simple extender which extends both the Gigabit Ethernet Data and IEEE 802.3at/802.3af Power over Ethernet transmission distance over the standard 100m (328 ft.) Cat5/5e/6 UTP cable to 200m, 300m, 400m and the maximum 500m. No matter how many PoE supported networking devices such as PoE IP cameras, PoE wireless access points and PoE IP phones are deployed, they are easily installed without the need of having an additional electrical outlet. However, limited by the UTP cabling, only up to 100 meters (328 ft.) of cable is used. Thus, the POEX1 is designed as the extender to transmit both Gigabit Ethernet data and 802.3af/at PoE power over another distance of 100m.
Specifications
Input RJ45 Ports: 10/100/1000 Mbps PoE+ Copper Port (RJ-45)
Output RJ45 Ports: 10/100/1000 Mbps PoE+ Copper Port (RJ-45)
Input Voltage: 48V-56V DC
Output Voltage: 44~52V DC
PoE Power: Max. 30.8 Watts Input, Max. 26 Watts Output
Network Cable: Cat5e (or above) UTP
Power Consumption: 2.6 Watts (System Maximum) / PoE Output at Maximum 36 Watts
Data Transmission Distance: Up to 100m, 500m with Daisy-chain Installation of 4 Units
Switch Architecture: Store-and-Forward
Switch Throughput: 10/100/1000 Mbps
Operating Temperature: -10 to 60°C (14 to 140°F)
Storage Temperature: -40 to 85°C (14 to 158°F)
Operating Humidity: 5% to 95% (non-condensing)
Storage Humidity: 5% to 95% (non-condensing)
Dimensions (Hx Wx D): 37.01″x27.56″x10.24″ (94x70x26mm)
Installation: Wall or Din-rail Mounting
