The D7000 DRA5000 is a high-power, low-noise raman fiber amplifier designed for distributed raman amplification, offering cost-effective solutions to extend the optical link power budget and significantly enhance OSNR. By using transmission fiber as the gain medium, it achieves distributed amplification, reducing system noise while optimizing gain and noise performance. Supporting from a single DWDM channel to up to 80/96 channels, the DRA5000 meets the demanding requirements of service providers and enterprise networks, ensuring superior reach and optical performance.
Specifications
Operating Wavelength
1529~1561nm (80CH)
1528~1567nm (96CH)
Signal Input Power
0~20dBm (Co-propagating)
-45~-20dBm (Counter-propagating)
Pump Wavelength
1425~1490nm (1480nm typical)
Pump Output Power
1000mW
Custom Gain Range
6~14dB
Gain Flatness
＜2.5dB
Noise Figure
-3~0dB (-2dB typical)
Operation Mode
ACC
Management Interface
1x ETH RJ45
1x RS485
1x RS485
1x RS-232
Management
Device buttons, AmpCon™-T, WebGUI
Power Supply
AC:85V~123VAC;170V~264VAC
DC:-40V~-60VDC
DC:-40V~-60VDC
Power Consumption
30W
Dimensions (HxWxD)
44x236x483mm
Weight
6kg
Relative Humidity
5%~85% (Non-condensing)
Temperature
Operating -5 to 60°C (23 to 140°F)
Storage -40 to 80℃ (-40 to 176°F)
Storage -40 to 80℃ (-40 to 176°F)
Note:
1. RS485 and RS-232 are debug ports, not open to the public.
2. You can customize the ON/OFF gain in 6dB, 8dB for co-propagating raman, 10dB, 12dB, 14dB for counter-propagating raman, for other range of switching gain values, please
1. RS485 and RS-232 are debug ports, not open to the public.
2. You can customize the ON/OFF gain in 6dB, 8dB for co-propagating raman, 10dB, 12dB, 14dB for counter-propagating raman, for other range of switching gain values, please
for customization.
