The pre-amplifier operates at the receiving end of an optical link to compensate for losses in a demultiplexer located near the optical receiver. FMT pre-amplifier with 4.5dB low-noise, 26dB gain is designed to cost-effectively extend the optical link power budget. FMT EDFA can be used different types of point-to-point applications, OADM applications and active/passive ring applications. it can amplify the optical signal more than 120km long distance transmission scenarios. In addition, the amplifiers can be configured and monitored through MonitorOnline, which can help you manage your network more conveniently and efficiently.
Specifications
Amplifier Type
Pre-Amplifier
Operation Wavelength
1528nm-1564nm
Total Number of Channels Supported
40CH
Channel Spacing
50GHz
Optical Gain
26dB
Gain Flatness
1dB (Typical)
Input Power
-30dBm~+5dBm
Saturated Output Power
≤16dBm
Noise Figure
4.5dB (Typical)
Optical Connector
LC/UPC
Polarization Mode Dispersion (PMD)
0.5ps
Polarization Dependent Gain (PDG)
0.5dB
Power Consumption
≤15W
Operation Mode
AGC (Automatic Gain Control)
Housing
Pluggable Module (Occupies 1 slot in FMT managed chassis)
Management
SNMPv1, Monitor Online, Simple Management Tool
Operation Temperature
-10 to 60°C (14 to 140°F)
Storage Temperature
-20 to 75°C (68 to 167°F)
* Note: Extended operation temperature (maximum temperature range of -40°C to +85°C) can also be provided, for more details, please contact at sales@fs.com for consulting.
